– FNC MT Ø50

Programmable, Multi Turn and Analogue encoder

Info
Ladda ner

The FNC MT Ø50 has a robust mechanical and electrical construction with a freely programmable measuring range. With its Ø50mm outer diameter it can offer both shaft and end hollow shaft between 6 to 12mm and can give protection up to IP67. 0-10V voltage or 4-20mA current output.

Technical data

Electrical ratings 
Voltage supply10-30 VDC
ProtectionOutput short circuit protection and reverse polarity protection
Consumption w/o load60 mA (24 VDC)
Output signals0-10 VDC Voltage output

 

0-5 VDC Voltage output

4-20 mA current output

Measuring rangeUp to 65536 revolution
Interference immunityDIN EN 61000-6-2
Emitted interferenceDIN EN 61000-6-4
ApprovalCE
Mechanical design 
Dimensions (flange)ø50 mm (see drawings)
Shaft load140 N axial

 

240 N radial

Protection DIN EN 60529IP54, IP65
Operating speed10000 rpm
Starting torque0.025 Nm (IP 65)
MaterialsHousing: Aluminium

 

Flange: Aluminium

Shaft: Stainless steel

Shaft/Hollow shaft diameter6, 8, 10, 12 mm

 

(other diameters on request)

Bearings lifetime2x10 rev. At 100% of full rated shaft load (minimum)
Operating temperature-20…+85°C
Storage temperature-30°C…+90°C
Weight approx250 g

Dimensions

Part number code


Det finns ännu inga filer att ladda ner.

Allmän info

Fabrikat

Kategori

Typ

Montage

Tillämpning

Övrigt

Fråga oss

Martin Jonsson

West Sweden

Tel: +46 (8) 121 519 63

Skicka e-post

Niclas Qvist

Key account Sweden/Sales manager Norway

Tel: +46 (0) 8 121 519 57

Skicka e-post

Helena Benjamin

Northern and mid Sweden

Tel: +46 (0) 8 121 519 62

Skicka e-post

The FNC MT Ø50 has a robust mechanical and electrical construction with a freely programmable measuring range. With its Ø50mm outer diameter it can offer both shaft and end hollow shaft between 6 to 12mm and can give protection up to IP67. 0-10V voltage or 4-20mA current output.

Technical data

Electrical ratings 
Voltage supply10-30 VDC
ProtectionOutput short circuit protection and reverse polarity protection
Consumption w/o load60 mA (24 VDC)
Output signals0-10 VDC Voltage output

 

0-5 VDC Voltage output

4-20 mA current output

Measuring rangeUp to 65536 revolution
Interference immunityDIN EN 61000-6-2
Emitted interferenceDIN EN 61000-6-4
ApprovalCE
Mechanical design 
Dimensions (flange)ø50 mm (see drawings)
Shaft load140 N axial

 

240 N radial

Protection DIN EN 60529IP54, IP65
Operating speed10000 rpm
Starting torque0.025 Nm (IP 65)
MaterialsHousing: Aluminium

 

Flange: Aluminium

Shaft: Stainless steel

Shaft/Hollow shaft diameter6, 8, 10, 12 mm

 

(other diameters on request)

Bearings lifetime2x10 rev. At 100% of full rated shaft load (minimum)
Operating temperature-20…+85°C
Storage temperature-30°C…+90°C
Weight approx250 g

Dimensions

Part number code


General info

Supplier

Category

Product type

Mounting

Application

Attributes

Ask us

Martin Jonsson

West Sweden

P: +46 (8) 121 519 63

Email

Niclas Qvist

Key account Sweden/Sales manager Norway

P: +46 (0) 8 121 519 57

Email

Helena Benjamin

Northern and mid Sweden

P: +46 (0) 8 121 519 62

Email

Similar products

FNC FLM
Linear encoder with non-contact magnetic technology
FNC W115
Wire-module for length- and position measurement up to 15m
FNC ST
Programmable, Single Turn (ST) and Analogue Encoder
FNC W80
Wire-module for length- and position measurement up to 5,5m
searchfacebookglobelinkedininstagramapartmenttagsmartphonebubbleclock