– 

FNC MT Ø50

Programmable, Multi Turn and Analogue encoder

Facebook Twitter Linkedin
Info
Ladda ner

The FNC MT Ø50 has a robust mechanical and electrical construction with a freely programmable measuring range. With its Ø50mm outer diameter it can offer both shaft and end hollow shaft between 6 to 12mm and can give protection up to IP67. 0-10V voltage or 4-20mA current output.

 

Technical data

Electrical ratings  
Voltage supply 10-30 VDC
Protection Output short circuit protection and reverse polarity protection
Consumption w/o load 60 mA (24 VDC)
Output signals 0-10 VDC Voltage output

0-5 VDC Voltage output

4-20 mA current output

Measuring range Up to 65536 revolution
Interference immunity DIN EN 61000-6-2
Emitted interference DIN EN 61000-6-4
Approval CE

 

Mechanical design  
Dimensions (flange) ø50 mm (see drawings)
Shaft load 140 N axial

240 N radial

Protection DIN EN 60529 IP54, IP65
Operating speed 10000 rpm
Starting torque 0.025 Nm (IP 65)
Materials Housing: Aluminium

Flange: Aluminium

Shaft: Stainless steel

Shaft/Hollow shaft diameter 6, 8, 10, 12 mm

(other diameters on request)

Bearings lifetime 2x10 rev. At 100% of full rated shaft load (minimum)
Operating temperature -20…+85°C
Storage temperature -30°C…+90°C
Weight approx 250 g

 

Dimensions

 

Part number code

 

Get datasheet


Det finns ännu inga filer att ladda ner.

Allmän info

Fråga oss

Niclas Qvist

West Sweden and Norway

Tel: +46 (0) 8 121 519 57

Skicka e-post

Helena Benjamin

Northern Sweden

Tel: +46 (0) 8 121 519 62

Skicka e-post

Claes Eriksson

South, southeast Sweden and Denmark

Tel: +46 (0) 8 121 519 55

Skicka e-post

Ann Åberg

Support, inside sales

Tel: +46 (0) 8 121 519 61

Skicka e-post

The FNC MT Ø50 has a robust mechanical and electrical construction with a freely programmable measuring range. With its Ø50mm outer diameter it can offer both shaft and end hollow shaft between 6 to 12mm and can give protection up to IP67. 0-10V voltage or 4-20mA current output.

 

Technical data

Electrical ratings  
Voltage supply 10-30 VDC
Protection Output short circuit protection and reverse polarity protection
Consumption w/o load 60 mA (24 VDC)
Output signals 0-10 VDC Voltage output

0-5 VDC Voltage output

4-20 mA current output

Measuring range Up to 65536 revolution
Interference immunity DIN EN 61000-6-2
Emitted interference DIN EN 61000-6-4
Approval CE

 

Mechanical design  
Dimensions (flange) ø50 mm (see drawings)
Shaft load 140 N axial

240 N radial

Protection DIN EN 60529 IP54, IP65
Operating speed 10000 rpm
Starting torque 0.025 Nm (IP 65)
Materials Housing: Aluminium

Flange: Aluminium

Shaft: Stainless steel

Shaft/Hollow shaft diameter 6, 8, 10, 12 mm

(other diameters on request)

Bearings lifetime 2x10 rev. At 100% of full rated shaft load (minimum)
Operating temperature -20…+85°C
Storage temperature -30°C…+90°C
Weight approx 250 g

 

Dimensions

 

Part number code

 

Get datasheet


General info

Ask us

Niclas Qvist

West Sweden and Norway

P: +46 (0) 8 121 519 57

Email

Helena Benjamin

Northern Sweden

P: +46 (0) 8 121 519 62

Email

Claes Eriksson

South, southeast Sweden and Denmark

P: +46 (0) 8 121 519 55

Email

Ann Åberg

Support, inside sales

P: +46 (0) 8 121 519 61

Email

Similar products

62SG
Optical Encoder
Series 30
Ø30mm, Incremental encoder
FNC 40EF & 40HF
60AD
Single axis joystick with encoder and push button switch

Stigab Stig Ödlund AB

VAT: SE556240633901

Fågelviksvägen 18, 145 53 Norsborg, Sweden

Deliveries: Port 14

Contact us

Phone: +46 (0)8 97 09 90 (sw)

Fax: +46 (0)8 97 65 90

Email: info@stigab.se

Opening hours

Mon–thu: 8am–4.30pm Fri: 8am–3pm

searchphonefacebookglobeenvelopelinkedininstagramapartmenttagsmartphonebubbleclock