Gustav Dyvling
Mid Sweden
Tel: +46 (0) 790 064 471
Well-established industry standard with a diameter of 58mm, configurable with output shaft or hollow shaft (4-16mm). The assembly is done either via clamping ring, synchro / servo flange or spring ink (hollow shaft assembly).
Model 58S - Outgoing shaft with Synchro / Servo flange
Model 58B - Outgoing shaft with clamping hub Ø36mm
Model 58D - Outgoing shaft with clamping hub Ø32mm
Model 58E - Hollow shaft sensor
Model 58H - Continuous hollow shaft sensor
Technical data
| Electrical ratings | 58S | 58E, 58H | 58B, 58D |
| Voltage supply | 4.75VDC to 30VDC
4.75VDC to 5.5VDC | ||
| Protection | Output short circuit protection.
Reverse polarity protection (except 5V version) | ||
| Consumption w/o load | 60 mA (24 VDC) | ||
| Resolution (steps/turn) | 1…25000 | Up to 65536 | 1…25000 up to 65536 |
| Reference signal | Zero pulse, width 90°
180°, 360° optional | ||
| Output frequency | >200 kHz | ||
| Output signals | 90° shifted A and B,
Z + inverted | ||
| Output circuit | Linedriver/RS422
Push-pull short-circuit proof NPN Open Collector | ||
| Interference immunity | DIN EN 61000-6-2 | ||
| Emitted interference | DIN EN 61000-6-4 | ||
| Approval | CE |
| Mechanical design | 58S | 58E, 58H | 58B, 58D |
| Dimensions (flange) | Ø58 mm | ||
| Shaft loading | <120 N axial
<160 N radial | ||
| Protection DIN EN 60529 | IP54, IP65 | ||
| Operating speed | 10000 rpm | ||
| Starting torque | <0,025 Nm (IP67) | ||
| Materials | Housing: Aluminium
Flange: Aluminium Shaft: Stainless steel | ||
| Shaft diameter | 4, 6, 8, 10mm
(other dimensions on request) | 6, 8, 10, 12, 14, 15, 16mm
(other dimensions on request) | 4, 6, 8, 10, 12, 14, 15mm
(other dimensions on request) |
| Bearings lifetime | 2x10 rev. at 100% of full rated shaft load (minimum) | ||
| Operating temperature | -20…+85°C | ||
| Storage temperature | -30°C up to +90°C | ||
| Weight approx | 250g |
Dimensions
58B 58E 58H 58S
Part number code
