Gustav Dyvling
Mid Sweden
Tel: +46 (0) 790 064 471
Here you get a smaller encoder with a diameter of 30mm that can be configured with output shaft or hollow shaft (4, 6 or 8mm). The mounting is done either via clamping ring, synchro / servo flange or spring ink (hollow shaft assembly).
Technical data
| Electrical ratings: | |
| Voltage supply | 4,75-30VDC
4,75-5,5VDC |
| Protection | Output short circuit protection and reverse polarity protection (except 5V version) |
| Consumption w/o load | 30 mA (24 VDC) |
| Output signals | Linedriver/RS422
Push-pull NPN |
| Measuring range | Up to 2500ppr |
| Interference immunity | DIN EN 61000-6-2 |
| Emitted interference | DIN EN 61000-6-4 |
| Approval | CE |
| Mechanical design | |
| Dimensions (flange) | Ø30 mm (see drawings) |
| Shaft load | 20 N axial
30 N radial |
| Protection DIN EN 60529 | IP54, IP65 or IP67 |
| Operating speed | 10000 rpm |
| Starting torque | 0.01 Nm (IP 67) |
| Materials | Housing: Stainless steel
Flange: Stainless steel Shaft: Stainless steel |
| Shaft/Hollow shaft diameter | 4, 6, 8 mm
(other diameters on request) |
| Bearings lifetime | 2x109 rev. At 100% of full rated shaft load (minimum) |
| Operating temperature | -20…+85°C |
| Storage temperature | -30°C…+90°C |
| Weight approx | 130 g |
Dimensions
30B 30E 30S
Part number code
