– QR40EMN

Absolute contactless rotary encoder with separate position magnet

Info
Ladda ner

Our rotary encoders enable contactless measurement of an angular displacement from 0° to 360° without a mechanical stop. The QR40EMN is supplied without shaft, with a separate position magnet which is to be mounted on the rotating shaft. This proportional sensor can be delivered either with 0-5V or 4-20mA output signal, single or redundant output. The clearance between position magnet and sensor can be up to 10 mm! It is also available as fully redundant which makes it the perfect solution for designs where high safety is required. It has a resolution of about 0.09° (12 bit) or 0.18° (11 bit). Linearity better than +/-1 %. The encoder is delivered with 2m cable as standard if redundant output. 5-pole M12 if single output.

Measurement range:0 - 360° (subranges possible)
Energy supply:5V dc or 8 - 32V dc
Analogue output:0-5V or 4-20mA
Level of protection:IP67, IP69K
Resolution:0.09°(12 bit) or 0.18°(11 bit)
Housing:moulded plastic

Det finns ännu inga filer att ladda ner.

Allmän info

Fabrikat

Kategori

Typ

Montage

Tillämpning

Övrigt

Fråga oss

Martin Jonsson

West Sweden

Tel: +46 (8) 121 519 63

Skicka e-post

Niclas Qvist

Key account Sweden/Sales manager Norway

Tel: +46 (0) 8 121 519 57

Skicka e-post

Helena Benjamin

Northern and mid Sweden

Tel: +46 (0) 8 121 519 62

Skicka e-post

Our rotary encoders enable contactless measurement of an angular displacement from 0° to 360° without a mechanical stop. The QR40EMN is supplied without shaft, with a separate position magnet which is to be mounted on the rotating shaft. This proportional sensor can be delivered either with 0-5V or 4-20mA output signal, single or redundant output. The clearance between position magnet and sensor can be up to 10 mm! It is also available as fully redundant which makes it the perfect solution for designs where high safety is required. It has a resolution of about 0.09° (12 bit) or 0.18° (11 bit). Linearity better than +/-1 %. The encoder is delivered with 2m cable as standard if redundant output. 5-pole M12 if single output.

Measurement range:0 - 360° (subranges possible)
Energy supply:5V dc or 8 - 32V dc
Analogue output:0-5V or 4-20mA
Level of protection:IP67, IP69K
Resolution:0.09°(12 bit) or 0.18°(11 bit)
Housing:moulded plastic

General info

Supplier

Category

Product type

Mounting

Application

Attributes

Ask us

Martin Jonsson

West Sweden

P: +46 (8) 121 519 63

Email

Niclas Qvist

Key account Sweden/Sales manager Norway

P: +46 (0) 8 121 519 57

Email

Helena Benjamin

Northern and mid Sweden

P: +46 (0) 8 121 519 62

Email

Similar products

QR30N
Small absolute contactless rotary encoder with separate position magnet
QR40
Absolute contactless rotary encoder with shaft
FNC W120
Wire-module for length- and position measurement up to 20m
FNC MBAA44
Rotating absolute analogue encoder with separate magnet
searchfacebookglobelinkedininstagramapartmenttagsmartphonebubbleclock