– HTWS

Small Hall Effect Proportional Output Thumbwheel

Info
Ladda ner

The HTWS thumbwheel hall effect proportional output thumbwheel is a smaller version of OTTO’s HTW and HTWM. It is a spring returnto-center, single axis thumbwheel that provides a linear change in voltage output corresponding to actuator movement in either direction from center.

Its smaller size makes it a perfect choice for use in grips or panels where space is limited. The HTWS joystick base is available with eight output options, including increasing and decreasing voltage output from the center position to the full travel position and single or dual (redundant) outputs.

The HTWS snaps into a 0.895” x 0.420” panel opening. Electronics are sealed to IP68S, and an optional sealing boot is offered for added protection against dust, sand, and water ingress. The HTWS offers a three million cycle rotational life, operate force options and excellent EMI /RFI immunity. It is available with flying wire leads or pin connection.

Technical data - HTWS thumbwheel

Supply voltage:5 VDC (+/- 0,5 VAC)
Supply current:10mA max
Output:See below
Angle of rotation:+20° - 20° (total 40°)
Life:3.000.000 cycles
Actuation force:240 grams
Temperature range:-40°C - +85° C

Dimensions - HTWS thumbwheel

HTWS thumbwheel OTTO

Part number code - HTWS thumbwheel

HTWS thumbwheel OTTO

Output - HTWS thumbwheel

HTWS thumbwheel OTTO

Det finns ännu inga filer att ladda ner.

Allmän info


Warning: Undefined variable $post in /www/webvol9/7s/dl3w34kejqtj65j/stigab.se/public_html/wp-content/plugins/oxygen/component-framework/components/classes/code-block.class.php(128) : eval()'d code on line 2

Warning: Attempt to read property "ID" on null in /www/webvol9/7s/dl3w34kejqtj65j/stigab.se/public_html/wp-content/plugins/oxygen/component-framework/components/classes/code-block.class.php(128) : eval()'d code on line 2

Warning: Undefined variable $post in /www/webvol9/7s/dl3w34kejqtj65j/stigab.se/public_html/wp-content/plugins/oxygen/component-framework/components/classes/code-block.class.php(128) : eval()'d code on line 3

Warning: Attempt to read property "ID" on null in /www/webvol9/7s/dl3w34kejqtj65j/stigab.se/public_html/wp-content/plugins/oxygen/component-framework/components/classes/code-block.class.php(128) : eval()'d code on line 3

Warning: Undefined variable $post in /www/webvol9/7s/dl3w34kejqtj65j/stigab.se/public_html/wp-content/plugins/oxygen/component-framework/components/classes/code-block.class.php(128) : eval()'d code on line 4

Warning: Attempt to read property "ID" on null in /www/webvol9/7s/dl3w34kejqtj65j/stigab.se/public_html/wp-content/plugins/oxygen/component-framework/components/classes/code-block.class.php(128) : eval()'d code on line 4

Warning: Undefined variable $post in /www/webvol9/7s/dl3w34kejqtj65j/stigab.se/public_html/wp-content/plugins/oxygen/component-framework/components/classes/code-block.class.php(128) : eval()'d code on line 5

Warning: Attempt to read property "ID" on null in /www/webvol9/7s/dl3w34kejqtj65j/stigab.se/public_html/wp-content/plugins/oxygen/component-framework/components/classes/code-block.class.php(128) : eval()'d code on line 5

Warning: Undefined variable $post in /www/webvol9/7s/dl3w34kejqtj65j/stigab.se/public_html/wp-content/plugins/oxygen/component-framework/components/classes/code-block.class.php(128) : eval()'d code on line 6

Warning: Attempt to read property "ID" on null in /www/webvol9/7s/dl3w34kejqtj65j/stigab.se/public_html/wp-content/plugins/oxygen/component-framework/components/classes/code-block.class.php(128) : eval()'d code on line 6

Warning: Undefined variable $post in /www/webvol9/7s/dl3w34kejqtj65j/stigab.se/public_html/wp-content/plugins/oxygen/component-framework/components/classes/code-block.class.php(128) : eval()'d code on line 7

Warning: Attempt to read property "ID" on null in /www/webvol9/7s/dl3w34kejqtj65j/stigab.se/public_html/wp-content/plugins/oxygen/component-framework/components/classes/code-block.class.php(128) : eval()'d code on line 7
Fabrikat

Kategori

Typ

Montage

Tillämpning

Övrigt

The HTWS thumbwheel hall effect proportional output thumbwheel is a smaller version of OTTO’s HTW and HTWM. It is a spring returnto-center, single axis thumbwheel that provides a linear change in voltage output corresponding to actuator movement in either direction from center.

Its smaller size makes it a perfect choice for use in grips or panels where space is limited. The HTWS joystick base is available with eight output options, including increasing and decreasing voltage output from the center position to the full travel position and single or dual (redundant) outputs.

The HTWS snaps into a 0.895” x 0.420” panel opening. Electronics are sealed to IP68S, and an optional sealing boot is offered for added protection against dust, sand, and water ingress. The HTWS offers a three million cycle rotational life, operate force options and excellent EMI /RFI immunity. It is available with flying wire leads or pin connection.

Technical data - HTWS thumbwheel

Supply voltage:5 VDC (+/- 0,5 VAC)
Supply current:10mA max
Output:See below
Angle of rotation:+20° - 20° (total 40°)
Life:3.000.000 cycles
Actuation force:240 grams
Temperature range:-40°C - +85° C

Dimensions - HTWS thumbwheel

HTWS thumbwheel OTTO

Part number code - HTWS thumbwheel

HTWS thumbwheel OTTO

Output - HTWS thumbwheel

HTWS thumbwheel OTTO

General info

Supplier

Category

Product type

Mounting

Application

Attributes

Ask us

Martin Jonsson

West Sweden

P: +46 (8) 121 519 63

Email

Niclas Qvist

Key account Sweden/Sales manager Norway

P: +46 (0) 8 121 519 57

Email

Helena Benjamin

Northern and mid Sweden

P: +46 (0) 8 121 519 62

Email

searchfacebookglobelinkedininstagramapartmenttagsmartphonebubbleclock