Patrik Widstrand
Norway, Denmark & Marine applications
Tel: +46 70-564 82 20
Absolute Encoder (single-turn, ST or multi-turn, MT) with Bus cover that simplifies installation of your own selected cable. Depending on your application and needs, there are a number of different mounting brackets to order. By default, it is possible to configure the sensor with a 6, 8 or 10mm end hollow shaft. If you need other dimensions, please contact us.
Technical data
| Electrical ratings | |
| Voltage supply | 5.5VDC to 30VDC
4.75VDC to 5.5VDC 8VDC to 30VDC |
| Protection | Output short circuit protection
Reverse polarity protection |
| Consumption w/o load | 50 mA (24 VDC) |
| Initializing time typ. | 170 ms after power on |
| Interface | Profibus/CANopen |
| Resolution (steps/turn) | 9 to 19 bit |
| Number of revolution | Up to 32 bit |
| Code | Binary |
| Code sequence | CW default, programmable |
| Absolute accuracy, magnetic | +/-0.35° |
| Device adress | Rotary switch in bus cover |
| Interface immunity | DIN EN 61000-6-2 |
| Emitted interference | DIN EN 61000-6-4 |
| Approval | CE |
| Programmable parameters | Steps per revolution
Number of revolutions Preset Scaling Rotating direction |
| Diagnostic functions | Position or parameter error
Multiturn sensing |
| Status indicator | RED&GREEN-LED integrated in bus cover |
| Mechanical design | |
| Dimensions (flange) | Ø58 mm |
| Shaft loading | 140 N axial
240 N radial |
| Protection DIN EN 60529 | IP54, IP65 |
| Operating speed | 10000 rpm |
| Starting torque | 0.025 Nm (IP 67) |
| Materials | Housing: Aluminium
Flange: Aluminium Shaft: Stainless steel |
| Hollow shaft diameter | 6, 8 or 10 mm
(other diameters on request) |
| Bearings lifetime | 2x10 rev. at 100% of full rated shaft load (minimum) |
| Operating temperatur | -25…+90 °C |
| Weight approx | 300 g |
| Connection | Bus cover |
Dimensions
Part number code
