– FNC Tacho

Encoder for measuring speed

Info
Ladda ner

The FNC Tacho has a robust mechanical and electrical construction. The difference between a standard encoder and a tachometer is that the tacho is only used to give out speed information into an application. FNC Tacho gives an analog value (Volt or Ampere) depending on how fast the shaft on the front of the encoder rotates. With its Ø50mm outer diameter it can offer both shaft and end hollow shaft between 6 to 12mm and can give protection up to IP67. 0-10V voltage or 4-20mA current output.

Technical data

Electrical ratings 
Voltage supply10-30 VDC
ProtectionOutput short circuit protection

 

Reverse polarity protection

Consumption w/o load60 mA (24 VDC)
Output signals0-10 VDC Voltage output

 

0-5 VDC Voltage output

4-20 mA current output

ResolutionUp to 6000 rpm
Interference immunityDIN EN 61000-6-2
Emitted interferenceDIN EN 61000-6-4
ApprovalCE
Mechanical design 
Dimensions (flange)Ø58 mm
Shaft loading140 N axial

 

240 N radial

Protection DIN EN 60529IP54, IP65
Operating speed10000 rpm
Starting torque0.025 Nm (IP 67)
MaterialsHousing: Aluminium

 

Flange: Aluminium

Shaft: Stainless steel

Shaft/Hollow shaft diameter6, 8, 10, 12 mm

 

(other diameters on request)

Bearings lifetime2x10 rev. at 100% of full rated shaft load (minimum)
Operating temperatur-20…+85 °C
Storage temperature-30 °C up to +90 °C
Weight approx250 g

Dimensions

FNC Tacho

Part number code

FNC Tacho

Det finns ännu inga filer att ladda ner.

Allmän info


Warning: Undefined variable $post in /www/webvol9/7s/dl3w34kejqtj65j/stigab.se/public_html/wp-content/plugins/oxygen/component-framework/components/classes/code-block.class.php(128) : eval()'d code on line 2

Warning: Attempt to read property "ID" on null in /www/webvol9/7s/dl3w34kejqtj65j/stigab.se/public_html/wp-content/plugins/oxygen/component-framework/components/classes/code-block.class.php(128) : eval()'d code on line 2

Warning: Undefined variable $post in /www/webvol9/7s/dl3w34kejqtj65j/stigab.se/public_html/wp-content/plugins/oxygen/component-framework/components/classes/code-block.class.php(128) : eval()'d code on line 3

Warning: Attempt to read property "ID" on null in /www/webvol9/7s/dl3w34kejqtj65j/stigab.se/public_html/wp-content/plugins/oxygen/component-framework/components/classes/code-block.class.php(128) : eval()'d code on line 3

Warning: Undefined variable $post in /www/webvol9/7s/dl3w34kejqtj65j/stigab.se/public_html/wp-content/plugins/oxygen/component-framework/components/classes/code-block.class.php(128) : eval()'d code on line 4

Warning: Attempt to read property "ID" on null in /www/webvol9/7s/dl3w34kejqtj65j/stigab.se/public_html/wp-content/plugins/oxygen/component-framework/components/classes/code-block.class.php(128) : eval()'d code on line 4

Warning: Undefined variable $post in /www/webvol9/7s/dl3w34kejqtj65j/stigab.se/public_html/wp-content/plugins/oxygen/component-framework/components/classes/code-block.class.php(128) : eval()'d code on line 5

Warning: Attempt to read property "ID" on null in /www/webvol9/7s/dl3w34kejqtj65j/stigab.se/public_html/wp-content/plugins/oxygen/component-framework/components/classes/code-block.class.php(128) : eval()'d code on line 5

Warning: Undefined variable $post in /www/webvol9/7s/dl3w34kejqtj65j/stigab.se/public_html/wp-content/plugins/oxygen/component-framework/components/classes/code-block.class.php(128) : eval()'d code on line 6

Warning: Attempt to read property "ID" on null in /www/webvol9/7s/dl3w34kejqtj65j/stigab.se/public_html/wp-content/plugins/oxygen/component-framework/components/classes/code-block.class.php(128) : eval()'d code on line 6

Warning: Undefined variable $post in /www/webvol9/7s/dl3w34kejqtj65j/stigab.se/public_html/wp-content/plugins/oxygen/component-framework/components/classes/code-block.class.php(128) : eval()'d code on line 7

Warning: Attempt to read property "ID" on null in /www/webvol9/7s/dl3w34kejqtj65j/stigab.se/public_html/wp-content/plugins/oxygen/component-framework/components/classes/code-block.class.php(128) : eval()'d code on line 7
Fabrikat

Kategori

Typ

Montage

Tillämpning

Övrigt

The FNC Tacho has a robust mechanical and electrical construction. The difference between a standard encoder and a tachometer is that the tacho is only used to give out speed information into an application. FNC Tacho gives an analog value (Volt or Ampere) depending on how fast the shaft on the front of the encoder rotates. With its Ø50mm outer diameter it can offer both shaft and end hollow shaft between 6 to 12mm and can give protection up to IP67. 0-10V voltage or 4-20mA current output.

Technical data

Electrical ratings 
Voltage supply10-30 VDC
ProtectionOutput short circuit protection

 

Reverse polarity protection

Consumption w/o load60 mA (24 VDC)
Output signals0-10 VDC Voltage output

 

0-5 VDC Voltage output

4-20 mA current output

ResolutionUp to 6000 rpm
Interference immunityDIN EN 61000-6-2
Emitted interferenceDIN EN 61000-6-4
ApprovalCE
Mechanical design 
Dimensions (flange)Ø58 mm
Shaft loading140 N axial

 

240 N radial

Protection DIN EN 60529IP54, IP65
Operating speed10000 rpm
Starting torque0.025 Nm (IP 67)
MaterialsHousing: Aluminium

 

Flange: Aluminium

Shaft: Stainless steel

Shaft/Hollow shaft diameter6, 8, 10, 12 mm

 

(other diameters on request)

Bearings lifetime2x10 rev. at 100% of full rated shaft load (minimum)
Operating temperatur-20…+85 °C
Storage temperature-30 °C up to +90 °C
Weight approx250 g

Dimensions

FNC Tacho

Part number code

FNC Tacho

General info

Supplier

Category

Product type

Mounting

Application

Attributes

Ask us

Martin Jonsson

West Sweden

P: +46 (8) 121 519 63

Email

Niclas Qvist

Key account Sweden/Sales manager Norway

P: +46 (0) 8 121 519 57

Email

Helena Benjamin

Northern and mid Sweden

P: +46 (0) 8 121 519 62

Email

searchfacebookglobelinkedininstagramapartmenttagsmartphonebubbleclock