– 

FNC MT Ø58

Programmable, Multi Turn and Analogue encoder

Facebook Twitter Linkedin
Info
Ladda ner

The FNC MT Ø58 has a robust mechanical and electrical construction with a freely programmable measuring range. With its Ø50mm outer diameter it can offer both shaft and end hollow shaft between 6 to 12mm and can give protection up to IP67. 0-10V voltage or 4-20mA current output.

 

Technical data

Electrical ratings  
Voltage supply 10-30 VDC
Protection Output short circuit protection and reverse polarity protection
Consumption w/o load 60 mA (24 VDC)
Output signals 0-10 VDC Voltage output

0-5 VDC Voltage output

4-20 mA current output

Measuring range Up to 65536 revolution
Interference immunity DIN EN 61000-6-2
Emitted interference DIN EN 61000-6-4
Approval CE

 

Mechanical design  
Dimensions (flange) ø50 mm (see drawings)
Shaft load 140 N axial

240 N radial

Protection DIN EN 60529 IP54, IP65
Operating speed 10000 rpm
Starting torque 0.025 Nm (IP 65)
Materials Housing: Aluminium

Flange: Aluminium

Shaft: Stainless steel

Shaft/Hollow shaft diameter 6, 8, 10, 12 mm

(other diameters on request)

Bearings lifetime 2x10 rev. At 100% of full rated shaft load (minimum)
Operating temperature -20…+85°C
Storage temperature -30°C…+90°C
Weight approx 250 g

 

Dimensions

 

Part number code

 

Get datasheet

 


Det finns ännu inga filer att ladda ner.

Allmän info

Fabrikat

Kategori

Typ

Montage

Tillämpning

Övrigt

Fråga oss

Niclas Qvist

West Sweden and Norway

Tel: +46 (0) 8 121 519 57

Skicka e-post

Helena Benjamin

Northern Sweden

Tel: +46 (0) 8 121 519 62

Skicka e-post

Claes Eriksson

South, southeast Sweden and Denmark

Tel: +46 (0) 8 121 519 55

Skicka e-post

Ann Åberg

Support, inside sales

Tel: +46 (0) 8 121 519 61

Skicka e-post

The FNC MT Ø58 has a robust mechanical and electrical construction with a freely programmable measuring range. With its Ø50mm outer diameter it can offer both shaft and end hollow shaft between 6 to 12mm and can give protection up to IP67. 0-10V voltage or 4-20mA current output.

 

Technical data

Electrical ratings  
Voltage supply 10-30 VDC
Protection Output short circuit protection and reverse polarity protection
Consumption w/o load 60 mA (24 VDC)
Output signals 0-10 VDC Voltage output

0-5 VDC Voltage output

4-20 mA current output

Measuring range Up to 65536 revolution
Interference immunity DIN EN 61000-6-2
Emitted interference DIN EN 61000-6-4
Approval CE

 

Mechanical design  
Dimensions (flange) ø50 mm (see drawings)
Shaft load 140 N axial

240 N radial

Protection DIN EN 60529 IP54, IP65
Operating speed 10000 rpm
Starting torque 0.025 Nm (IP 65)
Materials Housing: Aluminium

Flange: Aluminium

Shaft: Stainless steel

Shaft/Hollow shaft diameter 6, 8, 10, 12 mm

(other diameters on request)

Bearings lifetime 2x10 rev. At 100% of full rated shaft load (minimum)
Operating temperature -20…+85°C
Storage temperature -30°C…+90°C
Weight approx 250 g

 

Dimensions

 

Part number code

 

Get datasheet

 


General info

Supplier

Category

Type

Mounting

Application

Other

Ask us

Niclas Qvist

West Sweden and Norway

P: +46 (0) 8 121 519 57

Email

Helena Benjamin

Northern Sweden

P: +46 (0) 8 121 519 62

Email

Claes Eriksson

South, southeast Sweden and Denmark

P: +46 (0) 8 121 519 55

Email

Ann Åberg

Support, inside sales

P: +46 (0) 8 121 519 61

Email

Similar products

QR30N
Small absolute contactless rotary encoder with separate position magnet
FNC Tacho
FNC MT Ø50
Programmable, Multi Turn and Analogue encoder
FNC ST

Stigab Stig Ödlund AB

VAT: SE556240633901

Fågelviksvägen 18, 145 53 Norsborg, Sweden

Deliveries: Port 14

Contact us

Phone: +46 (0)8 97 09 90 (sw)

Fax: +46 (0)8 97 65 90

Email: info@stigab.se

Opening hours

Mon–thu: 8am–4.30pm Fri: 8am–3pm

searchphonefacebookglobeenvelopelinkedininstagramapartmenttagsmartphonebubbleclock