Patrik Widstrand
Norway, Denmark & Marine applications
Tel: +46 70-564 82 20
The MBAS series offers non-contact measurement via a stand-alone magnet in rotating applications for speed and position control such as angle, length and inclination.
Thanks to the non-contact technology, without wear parts, long life is achieved even in the toughest applications.
Technical data
| Electrical ratings | |
| Voltage supply | 5.5VDC to 30VDC 4.75VDC to 5.5VDC |
| Protection | Output short circuit protection Reverse polarity protection (except 5V version) |
| Consumption w/o load | <50mA (24VDC) |
| Interface | SSI |
| Resolution (steps/turn) | 12 bit |
| Absolute accuracy | Magnetic: +/-0.1° |
| Optoelectronic life time | 100.000 (min) |
| Code | Binary |
| Inputs | SSI differential clock Electronic zero setting |
| Output frequency | Up to 2MHz (SSI) |
| Output circuit | SSI data linedriver RS485 |
| Interference immunity | DIN EN 61000-6-2 |
| Emitted interference | DIN EN 61000-6-4 |
| Approval | CE |
| Mechanical design | |
| Dimensions (flange) | Ø44 mm |
| Shaft loading | 140 N axial 240 N radial |
| Protection DIN EN 60529 | IP |
| Operating speed | <10000 rpm |
| Starting torque | <0.025 Nm (IP67) |
| Materials | Housing, flange: Aluminium |
| Bearings lifetime | 2x10 rev. at 100% of full rated shaft load (minimum) |
| Operating temperature | -40°C up to +110°C |
| Storage temperature | -40°C up to +120°C |
| Weight approx. | 250g |
