Gustav Dyvling
Mid Sweden
Tel: +46 (0) 790 064 471
With our IO-Link encoder you get a smart and programmable point-to-point communication system for connecting sensors to an automation system. Because IO-Link is a standardized interface, you can mix solutions regardless of the manufacturer in your system. In this way, you can freely program and diagnose your automation solution according to your unique needs, which simplifies integration and changes in your complete solution. This also means that you can in a good way monitor how your machine is doing and thereby minimize unexpected downtime.
Technical data
| Electric ratings | |
| Voltage supply | 18-30VDC |
| Protection | Output short circuit protection Reverse polarity protection |
| Consumption w/o load | < 150 mA |
| Interface | IO-Link V1.1 |
| Bit rate | COM2 |
| Resolution (steps/turn) | Magnetic 16 bit |
| Absolute accuracy | Magnetic +/- 0,06 |
| Sensing method | Magnetic |
| Code | Binary |
| Code sequance | CW default, programmable |
| Programmable parameters | Direction Resolution |
| Note | All parameters changable via IO-Link interface |
| Interference immunity | DIN EN 61000-6-2 |
| Emitted interference | DIN EN 61000-6-4 |
| Approval | CE |
| Mechanical design | |
| Dimensions (flange) | Ø58 mm |
| Shaft loading | 40 N axial 80 N radial |
| Protection DIN EN 60529 | IP54, IP65 |
| Operating speed | <10000 rpm |
| Starting torque | <0,001Nm (IP65) |
| Materials | Housing, flange: Aluminium Shaft: Stainless steel |
| Shaft diameter | 6, 8, 10 mm (other diameters on request) |
| Bearings lifetime | 2x10 rev. at 100% of full rated shaft load (minimum) |
| Operating temperature | -40 to +90°C |
| Weight approx. | 350g |
