Gustav Dyvling
Mid Sweden
Tel: +46 (0) 790 064 471
FNC ST has a robust mechanics and electrical construction that is configured from the factory. Unlike MT, ST can only be programmed within 1 revolution (up to 360 degrees). With its external dimensions of Ø50mm or Ø58mm , you can choose either protruding shaft or hollow shaft between 6 to 12mm and tightness class up to IP67. The output signal is available as 0-10V voltage or 4-20mA current.
Technical data
| Electrical ratings | |
| Voltage supply | 10-30 VDC |
| Protection | Output short circuit protection
Reverse polarity protection |
| Consumption w/o load | 60 mA (24 VDC) |
| Output signals | 0-10 VDC Voltage output
1-5 VDC Voltage output 4-20 mA current output |
| Resolution | Up to 16 bit |
| Interference immunity | DIN EN 61000-6-2 |
| Emitted interference | DIN EN 61000-6-4 |
| Approval | CE |
| Mechanical design | |
| Dimensions (flange) | Ø50mm, Ø58 mm |
| Shaft loading | 140 N axial
240 N radial |
| Protection DIN EN 60529 | IP54, IP65 |
| Operating speed | 10000 rpm |
| Starting torque | 0.025 Nm (IP 67) |
| Materials | Housing: Aluminium
Flange: Aluminium Shaft: Stainless steel |
| Shaft/Hollow shaft diameter | 6, 8, 10, 12 mm
(other diameters on request) |
| Bearings lifetime | 2x10 rev. at 100% of full rated shaft load (minimum) |
| Operating temperatur | -20…+85 °C |
| Storage temperature | -30 °C up to +90 °C |
| Weight approx | 250 g |
Dimensions
Part number code
